Dinstar DAG1000-2S Dubai

Rating

Dinstar DAG1000-2S Dubai

The Dinstar DAG1000-2S Dubai is a versatile and robust analog telephone adapter that provides seamless connectivity between IP-based telephony networks and legacy POTS lines, fax machines, and PBX systems.

Category:

Description

Dinstar DAG1000-2S FXS Gateway Dubai

The Dinstar DAG1000-2S Dubai is a versatile and robust analog telephone adapter that provides seamless connectivity between IP-based telephony networks and legacy POTS lines, fax machines, and PBX systems. The device features two FXS ports, fax over IP, and a built-in high-speed NAT router. These powerful features and excellent voice quality make the Dinstar DAG1000-2S ideal for a variety of application environments, including small offices/home offices (SOHOs), small and medium-sized enterprises (SMEs), and residential use.

Additionally, the Dinstar DAG1000-2S Dubai supports automatic provisioning and centralized management, making it easy to deploy and maintain. This device is a cost-effective and reliable solution for businesses and individuals who are looking to transition to VoIP telephony.

Dinstar DAG1000-2S Dubai Features

  • Cost-effective ATA with 2 FXS ports
  • Fax over IP (T.38 and Pass-Through)
  • Support IPv4 and IPv6
  • TR069 and SNMP
  • Elastix and Broadsoft Certification
  • Multiple codecs : G.711A/U, G.723.1, G.729A/B, G.726
  • Fully compatible with leading IMS/NGN and SIP-based IP telephony systems

Technical Specifications

Physical Interfaces 

  • Telephone Port
  • DAG1000-2S : 2 FXS port (RJ11)
  • Ethernet Interfaces
  • DAG1000-2S :
    • 1 WAN, 10/100Mbps (RJ45)
    • 1 LAN, 10/100Mbps (RJ45)

Voice Capabilities & Fax

  • Codecs : G.711a/μ law, G.723.1, G.729A/B, G.726
  • Silence Suppression
  • Comfort Noise Generator(CNG)
  • Voice Activity Detection(VAD)
  • Echo Cancellation : G.168 with up to 128ms
  • Adaptive (Dynamic) Jitter Buffer
  • Hook Flash
  • Adjustable Gain Control
  • Programmable Gain Control
  • FAX : T.38 and Pass-through
  • Modem/POS
  • DTMF : SIP Info/RFC2833/Inband
  • VLAN 802.1P/802.1Q
  • Layer 3 QoS and DiffServ

FXS

  • FXS Connector : RJ11
  • Dial Mode : DTMF and Pulse
  • Pulse : 10 and 20 PPS
  • Caller ID : DTMF/FSK CLI Presentation
  • Max Cable Length : 3km
  • Reversed Polarity
  • Programmable Call Progress Tone

Software Features

  • Hunting Group
  • Web ACL
  • Telnet ACL
  • Action URL
  • PPPoE/IPv4/IPv6
  • Digitmap
  • Bandwidth Optimization
  • Routing Rules based on Prefixes
  • Caller/Called Number Manipulation

Supplementary Services

  • Call Waiting and Call Holding
  • Call Forwarding(Unconditional/Busy/No Reply)
  • Call Transfer (Blind & Attended)
  • Warm/Immediately Hotline
  • Do-not-disturb
  • Three Parties Conversation (3-way Conference)
  • Message Waiting Indicator

Environmental 

  • Power Supply : 12V DC, 1A
  • Power Consumption : <5W
  • Operating Temperature : 0 ºC  ~ 45 ºC
  • Storage Temperature : -20 ºC ~ 80 ºC
  • Humidity : 10% – 90% (Non-Condensing)
  • Dimensions : 126×76×25mm(W/D/H)
  • Unit Weight : <=0.2kg
  • Compliance : UL

Maintenance 

  • SNMP V1/V2/V3
  • TR069
  • Auto Provisioning (HTTP/FTP/TFTP)
  • Web/Telnet
  • Configuration Backup/Restore
  • Firmware Upgrade via Web
  • CDR
  • Syslog
  • Ping, Tracert Test
  • Network Capture
  • Outward Test (GR909 Standard)
  • NTP/Daylight Saving Time
  • IVR Local Maintenance
  • Cloud-based Management