Dinstar DAG1000-4O Dubai

Rating

Dinstar DAG1000-4O Dubai

The Dinstar DAG1000-4O Dubai is a versatile analog telephone adapter that facilitates smooth communication between IP-based telephony networks and traditional telephones (POTS), fax machines, and PBX systems.

Category:

Description

Dinstar DAG1000-4O Dubai

The Dinstar DAG1000-4O Dubai analog gateway is a device that allows you to connect traditional analog telephones and PBX systems to IP-based telephony networks. It has four FXO ports, which can be used to connect to analog PBX lines or PSTN lines. The DAG1000-4O uses the standard SIP protocol to communicate with IP telephony networks, and it is compatible with leading IMS/NGN platforms and SIP-based IP Phone systems.

The Dinstar DAG1000-4O Dubai is a low-cost and easy-to-use VoIP solution for small businesses, SOHOs, remote offices, and enterprises with multiple branches. It is easy to install and configure, and it provides high-quality voice quality.

Features :

  • Primary and secondary SIP account
  • Flexible FXO port groups
  • Multiple SIP trunks
  • Caller ID
  • Flexible routing and manipulation rules
  • Data/Voice/Management VLAN
  • T.38 and Pass-through
  • Friendly Web GUI access, easy to maintain

Physical Interfaces

  • Telephone interface : DAG1000-4O : 4*FXO, RJ-11
  • Ethernet Interface : 4*RJ-45 10/100 Base-Tx, RJ-45

Voice & Fax

  • G.711A/U law, G.723.1, G.729A/B
  • Comfort Noise Generation(CNG)
  • Voice Activity Detection(VAD)
  • Echo Cancellation(G.168)
  • Adaptive (Dynamic) Jitter Buffer
  • Programmable Gain Control
  • T.38/Pass-through/Modem FAX mode,Up to 14.4kbps
  • DTMF mode : Signal/RFC2833/INBAND

FXO Port 

  • Busy tone detection
  • No current detection
  • Voice interrupted detection
  • One stage dialing
  • Two stage dialing
  • Polarity Reversal
  • FAS(Fake billing correction )
  • Auto match fixed line impedance
  • Caller ID detection (BellcoreType 1&2)

Protocol

  • SIP V2.0 (RFC 3261,3262,3264)
  • IMS/3GPP
  • SDP (RFC 2327)
  • REFER (RFC 3515)
  • RTP/RTCP (RFC 1889,1890)
  • STUN (RFC 3489)
  • ARP/RARP (RFC 826/903)
  • SNTP (RFC 2030)
  • DHCP/PPPoE
  • TFTP/HTTP/HTTPS
  • DNS/DNS SRV (RFC 1706/RFC 2782)
  • VLAN 802.1P/802.1Q

Maintain & Upgrade

  • Web based configuration
  • Telnet configuration
  • Data backup/restore
  • Support English and Chinese language
  • Firmware upgrade by TFTP
  • Web & telnet login password modify
  • Factory reset
  • Automatic time synchronization
  • IVR local maintenance management

Physical propertiesPacking

  • Power : input : 100-240V,50-60Hz,1.2A Max @External adapter 12VDC
  • Power consumption(W) : 4FXO : 12; 8FXO : 20
  • Temperature(operation) : -10 ?~ 45 ?(storage) : -20 ?~80 ?
  • Operation Humidity : 10%  – 90% no condensation
  • Dimension(w/D/H) : 242*152*40mm 1kg

Call & Routing

  • FXO port group
  • IP Trunk
  • Primary and secondary SIP account
  • 32inbound routing
  • 32outbound routing
  • Number manipulation
  • Dial plan

Network Features

  • NAT (Rout& Bridge)
  • Static IP, PPPoE, DHCP
  • DHCPserver
  • MAC address clone
  • DMZ
  • IP,TCP, UDP,TFTP, FTP, TCP,ARP,RARP, Ping, NTP, SNTP, Http, DNS, Tracert
  • Static/dynamic ARP

Homologation

  • CE,FCC